MG Midget/Healey Sprite 1098 Road Sports Engine - Balanced,276 Cam,Stage 3 Head

It is built to the specifications below.

• Selected 1098 Engine Block, Crank Shaft, and Con Rods.

• Chemically cleaned, Thoroughly checked, and inspected.

• Machined to include, Boring +060, New Cam bearings, and Skimmed fire face.

• Machined Centre Main - Centre Strap.

• New Core Plugs (Water and Oil)

• Balanced, Knife-edged, Cross-drilled and Machined crank - Balanced to Rods, Clutch and Flywheel

• New TRI-METAL King Main Bearing Shells.

• New Thrust Washers, Shimmed correctly.

• New TRI-METAL King Big End Bearing Shells.

• New Performance High Compression Pistons with Rings.

• New Vernier Duplex Timing Chain Kit Fitted and Shimmed with Crank correctly.

• 276 (Kent) Profile Camshaft installed.

• Timed Correctly.

• New Large Impeller Water Pump

• New Oil Filter Housing,

• Braided Oil Feed Pipe.

• Distributor Drive Fitted.

• New iSKY Cam Followers

• New Push Rods

• Stage 3 (Road Sports) specification Large Valve 1100cc Cylinder Head.

• Built using ARP Con Rod Bolts and Cylinder Heads Studs.

• New 1.35:1 Full Roller Rocker Rockers, correctly aligned for optimum geometry.

• New Rocker Shaft, Springs, Shims.

• Rocker Cover

• Rocker Cover Fixings

• Oil Pressure Sensor Fitted.

• Oil Pressure Relief Valve Fitted.

• MOCAL Oil Cooler kit - with Stat

• Timing Cover and Tappet Covers Fitted.

• All new hardware, New Gaskets.

• New Clutch, Flywheel and Ring gear

Retro Sport (DSN) Billet Upgrade for

• Pressure Relief Valve Nut

• Rocker Cover Bolts

• Fuel Pump Blank (where block requires)

• Oil Filter Housing